Tel：400-900-9069

Product Specifications

Product Name:9 Light Module

Series Model:MJX253D

Product use: Applicable occasions: single-sided light boxes in shopping malls, airports, subways, bus stops and other places;

Applicable occasions:Indoor and outdoor light boxes;

Scope of application:It is widely used in advertising light boxes with a thickness of 12-35CM, and is also suitable for local lighting in places.

Product Features:

1. The light source adopts EMC3030 high-grade lighting lamp beads, with low thermal resistance, low light decay and good color consistency

2. Two color temperatures of white and cool white are available

3. Constant current circuit design, high stability, consistent brightness of the first and last modules

4. TV backlight lens, light-emitting angle of 170°, uniform light-emitting, no macular aperture

5. The power of a single module is high, the brightness is high, the amount of light source used in the large light box is small, and the installation cost is low

6. Fire UL94V-0 class

7. 5 years warranty, durable

8. DC12V low power input, safe and reliable use, waterproof grade up to IP65

9. Applicable to 12-35cm thick advertising light boxes, also suitable for local lighting in places, etc.

Installation method:

Installed on the bottom of the light box, pre-positioned with adhesive, and fixed with screws;

Cascade can be cut: a single module can be cut;

Photoelectric parameters:

Additional parameters:

Note:

①The test environment temperature is 25±2℃;

②The above data are typical values, and the actual parameters of the product may be different from the typical data.

Size Chart:

Light distribution graph:

Connection diagram

Installation Instructions

※The main power cable should use more than 2x1.5mm2 cable. If the power cable of the straight light needs to be lengthened, it must use a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cable and cause the power cable to overheat and cause adverse consequences. Switch the power supply and the straight light The length of the power line between the two should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

※Please use the wiring scheme in the connection diagram;

※When installing the straight light, screw the screw into the hole of the fixing frame and lock it;

※When the wire conductor is exposed at the end of the straight light, firstly use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Do not touch or work with electricity on this product; it is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.

package instruction

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The experiment uses the metal "cube model"

Evenly arranged according to product photoelectric performance parameters

Engineering case: