Tel：400-900-9069

Product Specifications

Product name: LED side light module

Series Model: MJX266E

Product use: Applicable occasions: single-sided light boxes in shopping malls, airports, subways, bus stops and other places;

Applicable occasions: indoor and outdoor light boxes;

Scope of application: Suitable for single-sided light boxes with a thickness of 6-20cm. .

Product Features:

1. The light source adopts EMC3030 high-grade lighting lamp beads, with low thermal resistance, low light decay and good color consistency

2. White/pure white/warm white color temperature optional

3. PMMA optical lens, luminous angle 15*45°

4. Suitable for 500-1000mm distance to play small light box

5. The aluminum substrate has external leakage, good heat dissipation and low light decay.

6. There is a thermal conductive adhesive on the back, which has good viscosity and can quickly conduct heat to the profile

7. Fire UL94V-0 class

8. 3 years warranty, up to 5 years warranty

9. DC12V low power input, safe and reliable to use, waterproof grade up to IP65

10. Applied to 6-20cm thick single and double-sided light boxes

Warranty:

5 years/25000H

Installation method:

Installed on the side of the light box, the adhesive is pre-positioned, and the screw is fixed;

Three modules can be cut as a unit.

Photoelectric parameters:

Remark:

①The test environment temperature is 25±2℃;

②The above data are typical values, and the actual parameters of the product may be different from the typical data. Data are subject to change without notice.

③This module is a high-power product and cannot use double-ended power supply.

External Dimensions:

Light distribution graph:

Connection diagram

Installation diagram

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The metal cube model was selected for the experiment

Evenly arranged according to product photoelectric performance parameters

Installation Instructions:

1. Use 2x2.5mm2 or more cables for the main power cord. If the power cord of the product needs to be lengthened, you must choose a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cord and cause excessive heat and cause adverse consequences. The length of the power cord should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

2. Please use the wiring scheme in the connection diagram, and the power output multiple channels should be connected to multiple channels to prevent the power overload of a single power supply channel;

3. When installing the product, screw the screw into the hole of the fixing frame, lock it, or install it with adhesive backing;

4. When the wire conductor at the end of the product is exposed, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

5. In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

6. When installing the power supply of this product, please do not touch or work with electricity;

7. It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.

Packaging diagram

package instruction

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Engineering case: