After buying a new house, we have to decorate the new house. The ceiling and side walls need to be decorated with LED light strips. During the installation process, we use good methods and steps to achieve twice the result with half the effort, save time and effort, and the decorative effect is better. .

When the LED light strip is used for interior decoration, it is very simple to install because it does not have to withstand the wind and rain. First of all, clean up the position where the light bar is to be attached to the wall, wipe off the dust or soil and other substances that affect the adhesion performance of the 3M tape. The surface must be flat and clean. Otherwise the product will fall off. There is self-adhesive 3M double-sided tape on the back of each LED light strip. When installing, you can directly tear off the sticker on the surface of the 3M double-sided tape, and then fix the LED light strip in the place to be installed, and press it flat with your hands. . When installing the product, the bending place should be avoided just in the position of the LED chip or other components, so as not to easily damage the product and affect the service life of the product. During the installation and use of the product, please pay attention to anti-static. It is not allowed to touch the product with sharp objects. At the same time, avoid contact with corrosive chemicals such as strong acid and alkali. For the upper part of the ceiling, considering the gravity of the light bar itself and the pulling force of the wire, make a slot for fixing every half meter at the interface, especially the place where the light bar outlet must be fixed with a slot, and the fixing point is 0.3 meters away. As for some places that need corners or are long, what should I do? It is very simple. The LED light strip is a circuit structure composed of 3 LEDs in series and parallel. Every 3 LEDs can be cut off and used alone. Special attention: There should be no dark nails, metal and other conductive objects in the contact part of the LED light strip and the wall. If there is, remove or avoid the conductive objects in advance to prevent unnecessary losses caused by short circuit of the light strip.

The above are the installation tips for LED light strips. If you need more detailed information on LED light strips, please consult Shenzhen SUNLITE Optoelectronics Co., Ltd. Shenzhen SUNLITE Optoelectronics Co., Ltd. is a company dedicated to LED light box lighting, logo lighting and decorative lighting. A high-tech enterprise engaged in product development, production, sales and service. Our website is http://en.sunlite-led.com, welcome to consult.