The configuration of the light bars in the light box is well-founded. The influence of the arrangement of the light bars on the effect of the entire light box is obvious. Improper configuration will cause problems such as ribs, dark spots, etc. How to configure it? The configuration of LED light bars is determined by various factors such as the different occasions where the light box is used, the different brightness requirements of the light box, and the thickness and size of the light box.

(1) According to the classification of different occasions where the light box is used, the LED light strips configured are also different.

① Waiting hall light boxes, rolling light boxes, light pole light boxes, newsstand light boxes, community light boxes, etc.

This type of light box is mainly used in large residential areas, shopping malls, large supermarkets, schools, computer cities, entertainment and leisure places and other areas. The requirements are relatively low, so side light strips are widely used at present. The side light source light bar is mainly suitable for light boxes with a distance of less than 3 meters. It is only necessary to arrange the light bar up and down or left and right to form up and down, left and right lighting, and the installation is very simple and convenient. A very economical and simple way.

② Pull cloth, card cloth light box, plastic light box, soft film light box, store light box, subway light box, airport light box

The application places of this type of light box are mainly distributed in roads, on both sides of the street, outdoor light boxes in large shopping malls, as well as in cinemas (theaters), exhibitions (sales), commercial downtown areas, stations, airports, docks, parks and other places. Since the size and thickness of the light box are different, the brightness of the light box is also required. Therefore, it is recommended to use a backlight for this type of light box to configure the LED light bar. The LED light bar is characterized by a very flexible size, which can meet the Light box lighting of different light box sizes, different brightness requirements, and different application scenarios, if it is an outdoor light box, it can also be waterproof, and its application fields are very wide.

(2) The number of light bars and the spacing of light bars are also different according to the thickness, size and brightness of the light box.

This is mainly for LED roller shutter light bars. At present, the main sizes on the market are 50cm, 60cm, 80cm, 100cm, 120cm light bars; there are also many light bar spacings, such as 5cm, 6.5cm, 7cm, 10cm, 15cm, etc. . If the brightness requirements of the light box are high, the number of light bars can be appropriately increased or high-brightness lamp beads can be used. Curtain light strips are relatively flexible in size. When configuring LED lights, it is only necessary that the distance between the light boxes is smaller than the thickness of the light boxes.

The above is a brief description of how to install LED strips. If you need more detailed information on LED strips, please consult Shenzhen SUNLITE Optoelectronics Co., Ltd. A high-tech enterprise engaged in R&D, production, sales and service of decorative lighting products. Our website is http://en.sunlite-led.com, welcome to consult.