LED light strips have gradually emerged in the decoration industry because of their lightness, energy saving, softness, long life, safety and other characteristics. However, because the LED strip is a new product, many customers have not used it yet and do not know how to install it. The installation effect is not very good, mainly because the light is uneven, and the light and shade in the lamp trough are uneven. The following will introduce the installation method of the LED light strip:

Tools: pliers, scissors, electrical tape

Material: light strip, special clip for light strip

method/step

1: First determine the length to be installed, and then take an integer to intercept it. Because this kind of light strip is a unit of 1 meter, it will not affect the circuit only if it is cut off from the notch. If it is cut at random, it will cause a unit not to light up. Example: If the length of 7.5 meters is required, the light strip should be cut to 8 meters.

2: The link plug LED itself is a diode, driven by direct current, so there are positive and negative poles. If the positive and negative poles are reversed, it is in an insulated state and the light strip does not light up. If the connection plug does not turn on, just disconnect the other end of the light strip.

3: The placement of the light strips, the light strips are packaged on a plate, the newly disassembled light strips will be twisted, and it is not easy to install. Since the light strip is single-sided, if it is not placed flat, there will be uneven light and shade, especially at the corners.

4: Now there is a clip specially used for the installation of light trough light strips on the market, called Light Strip Companion. After use, the installation speed and effect will be greatly improved. If you need it, you can search on Taobao.

.