The neon light strip has won the favor of the majority of advertisers with its soft characteristics, it can be twisted and bent arbitrarily to meet the needs of various shapes, PVC extrusion molding process, high product consistency, short production cycle, linear light, look No lamp beads, the light is even and soft. Compared with glass neon lights, it has the following advantages.

1. Safe and low voltage, low power consumption, because its light source is LED, it can work normally even in the case of 24V, and its power consumption is 4.7W/M (R, Y, O), 6.6W (G , B, W).

2. High brightness, the light source is made of imported ultra-high brightness LEDs in series, and the encrypted arrangement of 80LED/m or 90LED/m per meter is the fundamental guarantee for the overall luminous effect and high brightness.

3. Longevity and durability:

On the basis of LED technology, with a new structure, this lamp can achieve a super long service life of 100,000 hours under any circumstances. Compared with glass neon lights, its durability is not questioned, because there is no need to consider glass neon lights at all. The broken problem (PVC plastic lamp body)

4. Energy saving:

The flexible whole body light strip can save more than 70% of the energy consumption and electricity cost, glass neon light 26.25W/M, flexible whole body light strip, 4.7W/M (R, Y, O)6.6W/M(G, B, W)

5. Soft:

Flexible whole body light strip, it can be bent to a minimum diameter of 8CM, and can be cut at any scissors, so it can be bent into various characters and graphics

6. Safety:

Unlike glass neon lights, which require a high voltage of 15,000V for normal operation, the flexible full-body light strip can also operate normally at a low voltage of 24V, plus its shock resistance and low heat generation, it is extremely safe to use.

7. Moving and installation:

Because it is similar to the ordinary rainbow tube in essence, it is as safe and convenient to transport as the LED rainbow tube. It is equipped with a special card slot. When installing, you only need to nail the card slot first, and then clip it on. The installation of ordinary wires is as convenient and reliable.