Whether it is to see the glittering building outline or the delicate cosmetics display at night, the LED injection molding module is inseparable from the LED injection molding module, which is widely used. The contractor saves a lot of man-hours. The ease of installation and use is loved by the majority of advertisers and is rapidly gaining popularity. Today, I will share the steps of how to make LED light characters using LED injection molding module as the light source for your reference and learning.

The production method steps of exposed LED luminous characters:

1. Tools required for LED outdoor sign production: 30W or 40W electric soldering iron, solder, electric drill, glue gun, screwdriver, etc.

2. Other materials are required for the production of LED outdoor signs: forming varnished iron characters, wires, and special power supply for LED signs (DC5V).

3. Drilling holes: Fix the outsourced formed iron characters to a suitable position, and drill holes (9mm) with an electric drill. The spacing is determined by the height of the outdoor brand installation and the production cost. The LED center spacing is: 10-30mm, The spacing is small, the brightness is high, and the cost is higher.

4. Plug in the lights: clean the drilled holes and put the lights one by one.

5. Wiring: Connect the prepared and wired waterproof LED light strings. Each string has a reserved wire head. Generally, the red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the LED special power supply. The power supply is best placed. in a waterproof power box.

6. Test aging: After connecting all the LEDs, check the ones that do not light up, and then conduct an aging test for 48 hours.

7. Transport to the site and set up scaffolding for on-site installation.