How to choose a good LED injection molding module, which is very important for many consumers It is a very important issue, and the following 8 items will be used to illustrate this issue.

1. The brightness of the LED injection molding module is different, and the price is different. The LED chip used for LED injection molding module should be suitable for Laser Class I class standard.

2. LED injection molding module with strong antistatic ability, long life, Hence the high price. Usually LED injection moulding module with anti-static greater than 700V can be used for LED lighting .

3. LED injection molding module with the same wavelength, the same color, as required The same color, the higher the price. It is difficult for a manufacturer without an LED spectrophotometer to produce a product with pure color.

4. Leakage current, LED injection molding module is one-way conductive If there is a reverse current, it is called leakage current. LED injection molding module, with short life and low price.

5. Lighting angle, the light-emitting angle of LED injection molding module with different uses Different. The special light angle is more expensive.

6, life, the key to different quality is life, life is determined by light decay. Low light decay, long life and high price.

7. Chip, LED injection molding module is a chip, and different chips , prices vary widely. Chips in Japan and the United States are more expensive. Generally, the price of chips in Taiwan is lower than that of Japan and the United States, and the lowest domestic ones.

8. Colloid, the colloid of ordinary LED injection molding modules is generally epoxy resin. The price of LEDs with anti-ultraviolet and fire-retardant agents is more expensive. High-quality outdoor LED lighting should be anti-ultraviolet and fire-resistant.