Product Specifications

Product Name: 2835

Series model: LED diffuse light strip (pin header)

Product use: Applicable occasions: single-sided light boxes in shopping malls, airports, subways, bus stops and other places;

Applicable occasions: indoor and outdoor;

Scope of application: Suitable for single-sided light boxes with a thickness of 10-20cm;

Product Features:

1. Adopt the world's leading TV backlight technology;

2. The light source adopts high-brightness 2835 lamp beads with secondary light distribution;

3. The lens angle is 170°, the angle is large, the light is uniform and there is no macula;

4. Ra80, good color reproduction;

5. The single lamp can be cut, which can basically meet the requirements of all sizes of light boxes.

Installation method:

Installed on the bottom of the light box, pre-positioned with adhesive, and fixed with screws;

Cascade can be cut: a single module can be cut;

Optical parameters：

Remark:

①The test environment temperature is 25±2℃;

②The above data are typical values, and the actual parameters of the product may be different from the typical data. Data are subject to change without notice.

③This module is a high-power product and cannot use double-ended power supply.

Dimensional drawing (unit: mm [in]):

Connection diagram:

Light distribution graph:

Installation diagram:

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 60%

The metal light box model was selected for the experiment

Evenly arranged according to product photoelectric performance parameters

Installation Notes:

1. Use 2x2.5mm2 or more cables for the main power cord. If the power cord of the product needs to be lengthened, you must choose a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cord and cause excessive heat and cause adverse consequences. The length of the power cord should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

2. Please use the wiring scheme in the connection diagram, and the power output multiple channels should be connected to multiple channels to prevent the power overload of a single power supply channel;

3. When installing the product, screw the screw into the hole of the fixing frame, lock it, or install it with adhesive backing;

4. When the wire conductor is exposed at the end of the product, first cut off the exposed wire with diagonal pliers, and use a crimping cap to press the end to death for insulation protection;

5. In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

6. When installing the power supply of this product, please do not touch or work with electricity;

7. It is recommended to use a switching power supply (with short-circuit protection, overload protection) that has passed the relevant safety certification.

Packaging icon:

package instruction

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Engineering case: