Tel：400-900-9069

Product Specifications

Product Advantage

1. Adopt the world's leading TV backlight technology, no light spots, no dark areas, high illumination;

2. The light source adopts SMD2835 lamp beads, with high brightness and small light decay.

3. The single lamp can be cut, and the lamp distance is dense, which is suitable for the use of ultra-thin light boxes.

4. Using imported substrate, good bending resistance and strong thermal conductivity.

Technical parameters

Input voltage: DC24V

Power: 12.8W/pcs

Luminous flux: 1050-1150lm

Light effect: 80-90lm/w

Color temperature: 2700-13000K

LED light source: 2835

Beam angle: 170 °

Color : white light

Additional parameters

Standard cascade number: 10pcs

Shell color: white

Drive mode: constant voltage

Weight: 35g/pcs

Warranty time: 2 years/8800H

Working environment: -25-60℃

Storage temperature: -25-80℃

Protection class: IP33

Light data distribution map

Dimensions (unit: mm)

Connection diagram

※The main power cord should use more than 2x2.5mm2 cable. If the power cord of the straight light needs to be lengthened, it must use a wire with a specification of 1mm2/16# or above, so as not to overload the power cord and cause the power cord to overheat and cause adverse consequences. The length of the power cord should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

※Please use the wiring scheme in the connection diagram;

※When installing the straight light, screw the screw into the hole of the fixing frame and lock it;

※When the wire conductor is exposed at the end of the straight light, firstly use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Please do not touch or work with electricity on this product; it is recommended to use a switching power supply that has passed the relevant safety regulations (with short-circuit protection, over-voltage protection, and over-current protection).

Packaging Instructions

※Outer box size: 110*23.5*22cm

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Product Case