Tel：400-900-9069

Product Specifications

Product Advantage

1. The light box light source is driven by constant current, with stable and reliable performance;

2. The connection method adopts the plug-in method, which is convenient, flexible and easy to operate;

3. The light bar adopts domestic high-quality substrate, and the heat dissipation effect is good;

4. The lamp bead package adopts domestic well-known brand pure gold wire and glue;

5. The lamp beads use 2835 chips imported from the United States, with a color temperature of 6500K, a CRI >80, and a lumen value of 160LM.

Technical parameters

Power supply mode: constant current

Power: 6W/pcs

Luminous flux: 900-1000lm

Light effect: 150-160m/w

Color temperature: 6000-7000K

LED light source: 2835

Lighting angle: 120 °

Color: white

Additional parameters

Standard cascade number: 6pcs

Shell color: white

Drive mode: constant current

Warranty time: 5 years/43000H

Working environment: -25-60℃

Storage temperature: -25-80℃

Protection class: IP20

Light data distribution map

Dimensions (unit: mm)

Connection diagram

Installation Instructions

※The main power cord should use more than 2x2.5mm2 cable. If the power cord of the straight light needs to be lengthened, it must use a wire with a specification of 1mm2/16# or above, so as not to overload the power cord and cause the power cord to overheat and cause adverse consequences. The length of the power cord should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

※Please use the wiring scheme in the connection diagram;

※When installing the straight light, screw the screw into the hole of the fixing frame and lock it;

※When the wire conductor is exposed at the end of the straight light, firstly use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Please do not touch or work with electricity on this product; it is recommended to use a switching power supply that has passed the relevant safety regulations (with short-circuit protection, over-voltage protection, and over-current protection).

Product application map