R-COBX-X512

Product Purpose:decorative lighting

Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


Consult us

Product Details

Product Specifications

Product Features:

1. Absolute linear effect;

2. No light spots, no shadows, uniform and soft light;

3. Large light-emitting angle;

4. Good attenuation function, longer service life;

5. The flexible light strip can be arbitrarily fixed on the concave and convex surface, which is convenient for application;

6. Various specifications are available;



Installation method:

Fix it with 3M glue.



Bending radius: Rmin Rmin=20mm




Photoelectric parameters:

Model
Light color
Color temperature/wavelength
Lighting angle (°)
Color rendering index Ra
Typical Luminous Flux (lm/m)
Light Efficiency(lm/W)
Voltage (DCV)
Power (W/m) *
R-COB08-X512-2
R,G,B,W
Full color temperature range
180
90
900-1200
90-120
24
10
R-COB10-X512-2
R,G,B,W
Full color temperature range
180
90
1260-1680
90-120
24
14


Temperature related parameters (normal work):

Model
Power (W)
No brightness difference between head and tail MAX(m)
UL Cascade Length (m) *
TA(℃)
Operating temperature MAXTc(℃)
R-COB08-X512-2
10
3.5
5
-20~+60
105
R-COB10-X512-2
14
3.5
5
-20~+60
105


Other parameters:

Model
Points (points/m)
Minimum cut length (mm)*
Storage and transportation ambient temperature (℃)
R-COBX-X512-2
512
62.5
-20~+70

Remarks: ①. The test environment temperature is 25±2℃;

②. The above data are typical values, the actual parameters of the product may be different from the typical data, the data are subject to change without prior notice;

③. The parameters of the test when the above luminous flux is lit according to the corresponding color;

④. If the lamp beads of different gears are selected, the color temperature (wavelength) will be different, and the light parameters will fluctuate to a certain extent.

Power error ±10%. The maximum cascade length refers to the maximum cascade length when single-ended power supply is used. UL cascade length, which indicates the working length under UL class II @100W.24V. For cutting positions, see structure diagram.



Example size:




Luminescence curve ①, effective average illuminance ②



Connection diagram:




Packaging instructions:

①Attach a label on the reel ②Put the desiccant, accessory bag, and rolled reel into the bag ③Seal the bag and label it ④Put the processed bag into the outer box ⑤Use a seal Seal the outer box with glue ⑥ Put a label on the outer box ⑦ Put a bag on the outer box, if required, please add corner protection




Packaging Instructions:

Trade Type
Model
Product size L*W(mm)
Outer box size(mm)
m/disk
Plate/Case
foreign trade
R-COBX-X512-2
5000*8/10
500*270*230
5
100



Diagram of product section and required tools

①LED Light Strip ②LED Power Supply  ③Screw ④Electrical Tape ⑤Clamp ⑥Soldering Iron ⑦Diagonal Pliers ⑧Electric Batch





Installation method and steps

①Tear off the release paper behind the soft strip ②After confirming the installation position, cut off the redundant part of the soft strip ③Install the light strip according to the gap of the profile ④Fix the plug and buckle






Installation notes and more:

Before installation, please check whether the parameters of the product are consistent with the requirements (for product parameters, please refer to the "Product Specifications (or Instructions)" or labels).

The voltage, current and power of the power supply and load used must be consistent with this product. Please connect correctly according to the wiring diagram (connect the load first, then connect the power supply, or power on). During the operation, be careful to avoid short circuit. The positive and negative poles of the product lead and the positive and negative poles of the power output should be correctly connected, otherwise the light will not light up. Whether the power cord is screwed into the terminal is firm, it is advisable that it cannot be pulled out with bare hands. Terminals must be effectively waterproof and anti-corrosion treatment.

For straight and non-waterproof flexible strips, if the maximum cascade length is exceeded, dislocation must be supplemented. For straight and non-waterproof flexible strips, if the single lamp bead exceeds the normal current, please add auxiliary heat dissipation.



The bending diameter at any position should be greater than 1CM

It is strictly forbidden to twist light strip products in short distances. When using, ensure that the minimum twist distance is greater than the shear distance of a single group (25/50mm). The maximum twist angle of a single light strip (0.5 meters) is 720°




Product common faults and troubleshooting methods:


Product Simple Troubleshooting Table

Symptoms

Possible reasons

Solution

All LEDs are off

1.No power supply from the mains

Power Transmission

2.The power output is open or shorted, Causes automatic power protection

Troubleshoot, power cycle

3.The polarity of the power supply terminal of the product is reversed

sectionLED not bright

1.Part of the power supply is not powered

Check the power supply system and troubleshoot

2.Some products have power supply circuit errors

3.The polarity of individual products is reversed

Correct wiring

LEDUneven or insufficient brightness

1.Power overload

Increase power load

2.Excessive loss at the power output

Ensure that the working voltage error of the product is within ± of the standard voltage5within% , or maintain the circuit loss of each branch of the circuit Consumption remains average

3.Too many products in series

Adjust the number of products in each power supply branch, each branch cannot exceed the maximum cascade number or cascade length requirements

LED blinking

1.Poor connection of wiring points

Find out the fault point and troubleshoot

2.Power failure

Ensure that the working voltage error of the product is within the standard voltage

3.Not using the product as requested

Make sure to use the product according to the product instructions

warn:

※It is strictly forbidden to disassemble or modify the lamp, and the surface of the lamp bead is forbidden to touch with sharp objects. ※It is strictly forbidden to work with electricity during the installation process, and it is strictly forbidden to use chemical substances. ※When using neutral glass glue to fix the product, it must be cured in a spacious and airy environment for more than 4 hours before sealing.

※During the installation process, please do insulation, waterproof and anti-corrosion treatment for the tail end of the main line and the connection points of each branch circuit as required. If you need to lengthen the power cord of the power supply end of the product, you must use 16AWG (conductor cross-sectional area) as required. 1 square millimeter) or thicker wire core, so as not to cause adverse consequences due to overcurrent heating of the wire.

※Before supplying power, please confirm whether the power supply voltage meets the requirements and whether the circuit installation is correct.

※This product is an advertising sign type product, please do not use it as the main lighting. It is strictly prohibited to use the super-connection number or cascade length. The electrical connection between the power supply and the product should not be too long. The loss increases, resulting in inconsistent brightness at the beginning and end of the product.

※Please use professionals for installation, repair and maintenance. Non-professionals are strictly prohibited.





Declare and recall:

Statement: If the external line of this product is damaged, it must be replaced by the manufacturer or its service agent or a person with similar qualifications to avoid danger. The technical parameters given in this manual are typical values and are for reference only. The test report shall prevail.

All product illustrations in this manual are schematic diagrams, and the actual product received shall prevail. This product is subject to change without prior notice.




Recycling:

LED lighting products belong to the category of electronic products, please follow the relevant instructions of WEEE for recycling.




Related Products

  • R-COBX-X480

    R-COBX-X480

    Product purpose:decorative lighting

    Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

    Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


    Learn More
  • R-COBX-X512

    R-COBX-X512

    Product purpose:decorative lighting

    Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

    Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


    Learn More
  • R-COBX-X384

    R-COBX-X384

    Product purpose:decorative lighting

    Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

    Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


    Learn More