Product Specifications

Product Name: 2835 Series

Series Model: GT1023-2810-120W-24

Applicable occasions: shopping malls, supermarkets, advertising decoration, etc.;

Applications: Industrial lighting Neon letters Contour lighting

Product use:

1. LED Neon Letters or Signs

2. Contour lighting for ships, boats and trucks

3. Indoor and outdoor, park building lighting, etc.

Product Features:

1. Made of silicone material, resistant to yellowing and high temperature, it can be used in bad weather outdoors.

2. Anti-corrosion, acid and alkali, etc., can be used in extremely harsh environments.

3. Good flexibility, easy to bend, easy to shape, and tensile strength.

4. The light is uniform, no light spots, and the light effect is very soft.

5. Using high-brightness large-chip LED, pure gold wire and pure copper bracket package, good heat dissipation performance, high stability and long service life.

6. Lead-free SMT process (RoHS), the solder joints are round and smooth, and the connection is firm and reliable.

7. The product emits softly and uniformly, and there is no light spot at close range.

Technical parameters:

Installation Instructions:

Installation method:

①Prepare the screws and fixing buckles  ②Adjust the fixing buckles to the appropriate position, use a screwdriver to drive in the screws, and fix them  ④The lamp body is completely embedded in the fixing buckle, and the light-emitting surface is parallel to the upper edge of the fixing buckle

Block the incision:

①Cut and insert the fixing buckle at a suitable position  ②After cutting  ③Apply sealant evenly on the cut opening  ④Push the plug in the direction shown by the arrow ⑤Use hot air to dry the plug quickly Or air-dry it naturally, and make sure the installation is firm  ⑥The effect of the plug installation is completed

Notes for bending light bars:

When installing the light strip, please note that not all directions can be bent. For the shape, size and direction of the bending, please follow the illustration below to avoid damage to the light strip. ①Facing the light-emitting surface, the light bar is folded and bent in half (as shown in the picture), the minimum bending diameter is 40mm  ②The light-emitting surface is naturally upward, the light bar can be naturally bent left and right, (as shown in the picture) The minimum bending diameter is 50mm   ;③Facing the side of the light bar, (as shown in the picture) please do not bend the light bar downwards, so as not to damage the light bar.  ④Facing the side of the light bar, (as shown in the picture) please do not bend the light bar upwards, so as not to damage the light bar.

This product uses low-voltage DC power supply, and must use AC-DC switching power supply for voltage conversion before use! It is strictly forbidden to connect the LED light bar directly with AC110V or AC220V AC mains voltage, otherwise it will damage the light bar and may cause a safety accident!

Notes:

※The main power cable should use more than 2x1.5mm2 cable. If the power cable of the straight light needs to be lengthened, it must use a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cable and cause the power cable to overheat and cause adverse consequences. Switch the power supply and the straight light The length of the power line between the two cables should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

※Please use the wiring scheme in the connection diagram;

※When installing the neon light, screw the screw into the hole of the fixing frame and lock it;

※When the wire conductor is exposed at the tail end of the flexible light bar, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Please do not touch or work with electricity on this product; it is recommended to use a switching power supply that has passed the relevant safety regulations (with short-circuit protection, over-voltage protection, and over-current protection).

Packaging Instructions:

※Packed in anti-static bag Size: 250*350mm

※Outer box size: 457*337*320mm

※50 bags per carton, total 50PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.