Tel：400-900-9069

LED high-power injection molding modules are generally about 2 watts, very bright, and are generally used for side-lighting light boxes. Using this module saves the cost of light sources, the lighting effect is good, and the picture has no light spots and is very uniform. The reason is its special

As an optical component, the lens of the LED injection molding module has extremely high production requirements, such as dustproof, anti-static, maximum long-term working temperature, etc. Only when these conditions are met, the lens of the LED injection molding module can function normally in production and work.

With the continuous expansion of the application field of LED injection molding modules, the output of LED injection molding modules has also doubled several times. However, if a lens that is suitable for LED injection molding modules is not selected in manufacturing, it will cause many problems, such as light spots on the canvas.

In recent years, the voice of energy saving and emission reduction has been rising, and the electronic and electrical products with energy saving and emission reduction have been unanimously sought after by consumers.

The configuration of the light bars in the light box is well-founded. The influence of the arrangement of the light bars on the effect of the entire light box is obvious. Improper configuration will cause problems such as ribs, dark spots, etc. How to configure it?