Tel：400-900-9069

LED diffuse reflection light strips are widely used, adjust the spacing of the light strips and the thickness of the light box, and fix the upper and lower ends of the light strips with screws, which can greatly save the labor cost of light strip installation, and is practical and firm.

With the increasing demand for advertising light boxes, LED side light sources have become an important light source for advertising light boxes.

LED high-power injection molding modules are generally about 2 watts, very bright, and are generally used for side-lighting light boxes. Using this module saves the cost of light sources, the lighting effect is good, and the picture has no light spots and is very uniform. The reason is its special

With the continuous expansion of the application field of LED injection molding modules, the output of LED injection molding modules has also doubled several times. However, if a lens that is suitable for LED injection molding modules is not selected in manufacturing, it will cause many problems, such as light spots on the canvas.

The configuration of the light bars in the light box is well-founded. The influence of the arrangement of the light bars on the effect of the entire light box is obvious. Improper configuration will cause problems such as ribs, dark spots, etc. How to configure it?