Tel：400-900-9069

Product Specifications

Product Name: 2835 Series

Product use: LED sign

Series Model: MOX271D

Applicable occasions: Blister characters, metal characters, resin characters, etc.

Scope of application: It is widely used in advertising characters and light boxes with a thickness of 8-20CM, and is also suitable for local lighting in places.

Product Features:

The light source is SMD2835LED, with small thermal resistance, no light spot, low light decay, long life, and good consistency;

The product adopts PMMA optical lens with a luminous angle of 170°, which makes the light source diffuse and emit evenly.

It adopts waterproof and flame retardant PVC injection molding process, which has good waterproof and fire resistance, and is suitable for indoor and outdoor high and low temperature environments, which is safe and reliable.

The module adopts DC12V low voltage input, which is safe and reliable to use, and the waterproof level can reach IP65.

Applies to:

It is widely used in single and double-sided advertising signs or advertising light boxes with a thickness of 6-20CM, and is also suitable for local lighting in places.

Product parameters:

Other parameters:

Remark:

①The test environment temperature is 25±2℃;

②The above data are typical values, the actual parameters of the product may be different from the typical data

Lighting angle map:

Dimensions (unit: mm):

Connection diagram (unit: mm)

Installation Instructions

Use 2x2.5mm2 or more cables for the main power cord. If the power cord of the product needs to be lengthened, you must choose a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cord and cause excessive heat and adverse consequences. Switch the power supply between the power supply and the straight light. The length of the line should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

Please use the wiring scheme in the connection diagram;

When installing the product, screw the screw into the hole of the fixing frame, lock it, or install it with adhesive backing;

When the wire conductor at the end of the product is exposed, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

When installing the power supply of this product, please do not touch or work with electricity;

It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety regulations.

Installation method or installation diagram

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The experiment uses the metal "B" font model

Evenly arranged according to product photoelectric performance parameters

package instruction

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Project case: