Product Specifications

Product Name: 2835 Series

Product use: Sign lighting

Series Model: MBX259B

Applicable occasions: Blister characters, metal characters, resin characters, etc.

Scope of application: Widely used in advertising characters and light boxes with a thickness of 8-18CM, as well as local lighting in places, etc.

Product Features:

1. The light source adopts SMD2835 high-brightness lamp beads, with good color consistency and small light decay

2. Two color temperatures of white and cool white are available

3. Using engineering PVC material injection molding, good weather resistance, no cracking, no deformation

4. Fire UL94V-0 class

5. Optical lens, light weight, low cost, 170° light emitting angle, uniform light, no macular aperture

6. 5 years warranty, durable

7. DC12V low power input, safe and reliable use, waterproof grade up to IP65

8. Suitable for 6-18cm light box and luminous characters

Installation method:

Installation method: Use PE foam double-sided tape and neutral glass glue for positioning and fixing.

Cascade can be cut: a single module can be cut;

Product Warranty:

5 years/25000H, whichever comes first;

Photoelectric parameters:

Other parameters:

Remarks: ①The test environment temperature is 25±2℃;

②The above data are typical values, and the actual parameters of the product may be different from the typical data.

Dimensional drawing (unit: mm [in]):

Light distribution curve:

Connection diagram:

Installation Instructions:

1. Use 2x2.5mm2 or more cables for the main power cord. If the power cord of the product needs to be lengthened, you must choose a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cord and cause excessive heat and cause adverse consequences. The length of the power cord should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

2. Please use the wiring scheme in the connection diagram, and the power output multiple channels should be connected to multiple channels to prevent the power overload of a single power supply channel;

3. When installing the product, screw the screw into the hole of the fixing frame, lock it, or install it with adhesive backing;

4. When the wire conductor at the end of the product is exposed, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

5. In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

6. When installing the power supply of this product, please do not touch or work with electricity;

7. It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.

Installation method or installation diagram

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The experiment uses the metal "B" font model

Evenly arranged according to product photoelectric performance parameters

Packaging instructions:

package instruction

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Engineering case: