R-2808-XX120

Product Purpose:Decorative lighting

Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


Consult us

Product Details

Product Specifications

Product Features:


1. Using high lumen and high CRI 2835 lamp beads;

2. Using double-sided calendered copper flexible FPC, the bending angle is large and the installation is convenient;

3. Original imported 3M adhesive, easy to mount, stable and firm;

4. Adjustable light, can be arbitrarily cut and welded along the cutting line;



Installation method:


Fix it with 3M glue.



Bending radius: Rmin Rmin=20mm




Photoelectric parameters:

Model
Light color
Color temperature/wavelength (K/nm)
Lighting angle (°)
Color rendering index Ra
Typical Luminous Flux (lm/m)
Light Efficiency(lm/W)
Voltage (DCV)
Power (W/m) *
R-2808-XX120-1/2
W+W
2700-6500K
120
80+
600-700 per White
110-120
12V/24V
6+6


Temperature related parameters (normal work):

Model
Power (W)
No brightness difference between head and tail MAX(m)
UL Cascade Length (m) *
TA(℃)
Operating temperature MAXTc(℃)
R-2808-XX120-1/2
6+6
3
5
-20~+60
105



Other parameters:

Model
Points (points/m)
Minimum cut length (mm)*
Storage and transportation ambient temperature (℃)
R-2808-XX120-1/2
120
25/50
-20~+70

Remarks: ①. The test environment temperature is 25±2℃;

②. The above data are typical values, the actual parameters of the product may be different from the typical data, the data are subject to change without prior notice;

③. The parameters of the test when the above luminous flux is lit according to the corresponding color;

④. If the lamp beads of different gears are selected, the color temperature (wavelength) will be different, and the light parameters will fluctuate to a certain extent.

Power error ±10%. The maximum cascade length refers to the maximum cascade length when single-ended power supply is used. UL Cascade Length, which indicates the working length under UL class II @100W.24V. For cutting positions, see structure diagram.



Example size:



Connection diagram:



Packaging instructions:



Packaging Instructions:

Trade Type
Model
Product size L*W(mm)
Outer box size(mm)
m/disk
Plate/Case
Domestic trade R-2808-XX120-1/2
5000*8
500*270*230
5
100

1. Each (5M) roll of this product carries one reel, and each reel is packed in an aluminum foil bag;

2. The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different. The above weight is the estimated weight and the actual product shall prevail.



Installation section:


①LED Light Strip ②LED Power Supply  ③Screw ④Electrical Tape ⑤Clamp ⑥Soldering Iron ⑦Diagonal Pliers ⑧Electric Batch



Installation method and steps:





Installation notes and more:

Before installation, please check whether the parameters of the product are consistent with the requirements (for product parameters, please refer to the "Product Specifications (or Instructions)" or labels).

The voltage, current and power of the power supply and load used must be consistent with this product. Please connect correctly according to the wiring diagram (connect the load first, then connect the power supply, or power on). During the operation, be careful to avoid short circuit. The positive and negative poles of the product lead and the positive and negative poles of the power output should be correctly connected, otherwise the light will not light up. Whether the power cord is screwed into the terminal is firm, it is advisable that it cannot be pulled out with bare hands. Terminals must be effectively waterproof and anti-corrosion treatment.

For straight and non-waterproof flexible strips, if the maximum cascade length is exceeded, dislocation must be supplemented. For straight and non-waterproof flexible strips, if the single lamp bead exceeds the normal current, please add auxiliary heat dissipation.



The bending diameter at any position should be greater than 1CM

It is strictly forbidden to twist light strip products in short distances. When using, ensure that the minimum twist distance is greater than the shear distance of a single group (25/50mm). The maximum twist angle of a single light strip (0.5 meters) is 720°




Common product failures and troubleshooting methods:


Product Simple Troubleshooting Table

Symptoms

Possible reasons

Solution

All LEDs are off

1.No power supply from the mains

Power Transmission

2.The power output is open or shorted, cause power automatic protection

Troubleshooting, power on again

3.The polarity of the power supply terminal of the product is reversed

sectionLED not bright

1.Part of the power supply is not powered

Check the power supply system and troubleshoot

2.Some products have power supply circuit errors

3.The polarity of individual products is reversed

Correct wiring

LEDUneven or insufficient brightness

1.Power Overload

Increase the power load

2.Excessive loss at the power output

Ensure that the working voltage error of the product is within ± of the standard voltage5% to Consumption remains average< /span>

3.Too many products in series

Adjust the number of products in each power supply branch, each branch cannot exceed the maximum cascade number or cascade length requirements

LED blinking

1.Poor connection of wiring points

Find out the fault point and troubleshoot

2.Power failure

Ensure that the working voltage error of the product is within the standard voltage

3.product not used as required

Make sure to use the product according to the product instructions

Warning:

※It is strictly forbidden to disassemble or modify the lamp, and the surface of the lamp bead is forbidden to touch with sharp objects. ※It is strictly forbidden to work with electricity during the installation process, and it is strictly forbidden to use chemical substances. ※When using neutral glass glue to fix the product, it must be cured in a spacious and airy environment for more than 4 hours before sealing.

※During the installation process, please do insulation, waterproof and anti-corrosion treatment for the tail end of the main line and the connection points of each branch circuit as required. If you need to lengthen the power cord of the power supply end of the product, you must use 16AWG (conductor cross-sectional area) as required. 1 square millimeter) or thicker wire core, so as not to cause adverse consequences due to overcurrent heating of the wire.

※Before supplying power, please confirm whether the power supply voltage meets the requirements and whether the circuit installation is correct.

※This product is an advertising sign type product, please do not use it as the main lighting. It is strictly prohibited to use the super-connection number or cascade length. The electrical connection between the power supply and the product should not be too long. The loss increases, resulting in inconsistent brightness at the beginning and end of the product.

※Please use professionals for installation, repair and maintenance. Non-professionals are strictly prohibited.




Declare and recall:

Statement: If the external line of this product is damaged, it must be replaced by the manufacturer or its service agent or a person with similar qualifications to avoid danger. The technical parameters given in this manual are typical values and are for reference only. The test report shall prevail.

All product illustrations in this manual are schematic diagrams, and the actual product received shall prevail. This product is subject to change without prior notice.



Recycling:

LED lighting products belong to the category of electronic products, please follow the relevant instructions of WEEE for recycling.









Related Products

  • SMD 2835

    SMD 2835

    Product purpose:Decorative lighting

    Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

    Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


    Learn More
  • SMD 5050

    SMD 5050

    Product purpose:Decorative lighting

    Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

    Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


    Learn More
  • SMD 5630

    SMD 5630

    Product purpose:Decorative lighting

    Applicable Occasions:Shopping malls, supermarkets, advertising decoration, etc.

    Scope of Application:Home decoration lighting, building outline lighting, entertainment decoration, auxiliary lighting, landscape lighting


    Learn More