Product Specifications

Product Features:

1. Using 2835 lamp beads, high brightness and high luminous efficiency;

2. Using double-sided calendered copper flexible FPC, the bending angle is large and the installation is convenient;

3. Original imported 3M adhesive, easy to mount, stable and firm;

4. Various specifications and colors are available

Installation method:

Fix it with 3M glue.

Bending radius: Rmin Rmin=20mm

Photoelectric parameters:

Temperature related parameters (normal work):

Remarks: ①. The test environment temperature is 25±2℃; ②. The above data are typical values, the actual parameters of the product may be different from the typical data, and the data are subject to change without prior notice; ③. The above luminous flux is based on the corresponding color point When it is on, the parameters to be tested; ④. If the lamp beads of different gears are selected, the color temperature (wavelength) will be different, and the light parameters will fluctuate to a certain extent. Power error ±10%. The maximum cascade length refers to the maximum cascade length when single-ended power supply is used. UL Cascade Length, which indicates the working length under UL class II @100W.24V. For cutting positions, see structure diagram.

Example size:

Luminescence curve ①, effective average illuminance ②

Connection diagram:

Packaging instructions:

①Attach a label on the reel ②Put the desiccant, accessory bag, and rolled reel into the bag ③Seal the bag and label it ④Put the processed bag into the outer box ⑤Use a seal Seal the outer box with glue ⑥ Put a label on the outer box ⑦ Put a bag on the outer box, if required, please add corner protection

Packaging Instructions:

2. The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different. The above weight is the estimated weight and the actual product shall prevail.

Installation section:
①LED light strip ②LED power supply  ③Screw ④Electrical tape ⑤Clip ⑥Soldering iron ⑦Diagonal pliers ⑧Electric batch

Installation method and steps①Tear off the release paper behind the soft strip ②After confirming the installation position, cut off the excess soft strip ③Install the light strip according to the gap of the profile ④Install the plug buckle Just

Installation notes and more:

Before installation, please check whether the parameters of the product are consistent with the requirements (for product parameters, please refer to the "Product Specifications (or Instructions)" or labels). The voltage, current and power of the power supply and load used must be consistent with this product. Please connect correctly according to the wiring diagram (connect the load first, then connect the power supply, or power on). During the operation, be careful to avoid short circuit. The positive and negative poles of the product lead and the positive and negative poles of the power output should be correctly connected, otherwise the light will not light up. Whether the power cord is screwed into the terminal is firm, it is advisable that it cannot be pulled out with bare hands. Terminals must be effectively waterproof and anti-corrosion treatment. For straight non-waterproof flexible strips, if the maximum cascading length is exceeded, dislocation compensation must be performed. For straight non-waterproof flexible strips, if the single lamp bead exceeds the normal current, please add auxiliary heat dissipation.

The bending diameter at any position must be greater than 1CM. It is strictly forbidden to twist the light strip products in short distances. When using, ensure that the minimum twisting distance is greater than the shearing distance of a single group (50mm), and the maximum twisting angle of a single light strip (0.5 meters) is 720°.

Common product failures and troubleshooting methods:

Declaration and Recycling

Statement: If the external line of this product is damaged, it must be replaced by the manufacturer or its service agent or a person with similar qualifications to avoid danger. The technical parameters given in this manual are typical values and are for reference only. The test report shall prevail.

All product illustrations in this manual are schematic diagrams, and the actual product received shall prevail. This product is subject to change without prior notice.

Recycling:

LED lighting products belong to the category of electronic products, please follow the relevant instructions of WEEE for recycling.

Increase the power load

2.Excessive loss at the power output

Ensure that the working voltage error of the product is within ± of the standard voltage5within% , or maintain the circuit loss of each branch of the circuit Consumption remains average

3.Too many products in series

Adjust the number of products in each power supply branch, each branch cannot exceed the maximum cascade number or cascade length requirements

LED blinking

1.Poor connection of wiring points

Find out the fault point and troubleshoot

2.Power failure

Ensure that the working voltage error of the product is within the standard voltage

3.product not used as required

Make sure to use the product according to the product instructions

Declaration and Recycling

Statement: If the external line of this product is damaged, it must be replaced by the manufacturer or its service agent or a person with similar qualifications to avoid danger. The technical parameters given in this manual are typical values and are for reference only. The test report shall prevail.

All product illustrations in this manual are schematic diagrams, and the actual product received shall prevail. This product is subject to change without prior notice.

Recycling:

LED lighting products belong to the category of electronic products, please follow the relevant instructions of WEEE for recycling.