Product Specifications

Product Name: 2835 Series

Product use: LED sign

Series Model: MMX270B

Applicable occasions: Blister characters, metal characters, resin characters, etc.

Scope of application: Widely used in advertising words with a thickness of 8-20CM, and also suitable for local lighting in places, etc.

Product Features:

※The light source is SMD2835LED, with small thermal resistance, no light spot, low light decay, and good consistency;

※The product has low power consumption, high brightness, long service life and maintenance-free;

※Adopting PVC injection molding process, equipped with optical lens, large angle, uniform light emission, beautiful appearance, unique, good heat dissipation effect;

※DC12V low voltage input, safe and reliable use, waterproof grade up to IP65;

Installation method:

Installation method: Use PE foam double-sided tape and neutral glass glue for positioning and fixing.

Cascade can be cut: a single module can be cut;

Product Warranty:

3 years/13000H, whichever comes first;

Photoelectric parameters:

Other parameters:

Light data distribution map

Dimensions (unit: mm)

Connection diagram

Lighting data

Remarks: (1) The above lighting data is tested by the 7000K color temperature of the corresponding product;

(2) The thickness of the light box acrylic whiteboard in this range is 3mm, and the light transmittance is 60%;

(3) The illuminance in this range is the lowest illuminance value under the condition of uniform thickness and surface;

(4) The above data are for reference only.

Installation Instructions

※ Use 2x2.5mm2 or more cables for the main power line. If the module power line needs to be lengthened, you must choose a wire with a specification of 1mm2/16# or above, so as to avoid overloading the power line and cause excessive heat, causing adverse consequences. Switch the power line between the power modules The length should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

※Please refer to the wiring scheme in the connection diagram, if you have any questions, please call the corresponding personnel;

※When installing the module, screw the screws into the holes of the fixing frame and lock them;

※When the wire conductor at the end of the module is exposed, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Please do not touch or work with electricity on this product; it is recommended to use a switching power supply that has passed the relevant safety regulations (with short-circuit protection, over-voltage protection, and over-current protection).

package instruction

※Packed in electrostatic bag Size: 220*300*0.075mm

※Outer box size 520*370*260mm

※100PCS/bag, 100 layers per carton, total 1000PCS

※Net weight (NW) 15(1±10%)kg

※Gross weight (GW): 16(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

The above parameters are subject to change without notice.

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 60%

The experiment uses the metal "B" font model

Evenly arranged according to product photoelectric performance parameters

Project case: