Tel：400-900-9069

Product Specifications

Product Name: 2835 Series

Product use: LED sign

Series Model: MSX226B

Applicable occasions: Blister characters, metal characters, resin characters, etc.

Scope of application: 6-15CM thick single and double-sided advertising light boxes or advertising signs, also suitable for local lighting in places, etc.

Features:

1. SMD2835LED is used as the light source, with small thermal resistance, no light spot, light effect can reach 150LM/W, long life and good consistency;

2. The product adopts PC three-piece optical lens, the light-emitting angle is 170°, the light-emitting area is large and uniform;

3. Using waterproof and flame retardant ABS injection molding process, good waterproof and fire resistance, suitable for indoor and outdoor high and low temperature environments, safe and reliable;

4. The module adopts DC12V low voltage input, which is safe and reliable to use, with good air tightness, and the waterproof level can reach IP67;

Installation:

Installation method: Use PE foam double-sided tape and neutral glass glue for positioning and fixing.

Cascade can be cut: a single module can be cut;

Product Warranty:

5 years/25000H, whichever comes first

Photoelectric parameters:

Other parameters:

External Dimensions:

Installation diagram:

Installation diagram description

The test panel is a 6mm thick acrylic whiteboard with a light transmittance of about 60%

The experiment uses the metal "A" font model

Evenly arranged according to product photoelectric performance parameters

Connection diagram:

Lighting data:

Installation Instructions:

※The main power cable should use more than 2x2.5mm2 cable. If the module power cable needs to be lengthened, it must use a wire with a specification of 1mm2/16# or more, so as to avoid overloading the power cable and cause excessive heat and cause adverse consequences. Switching the power supply module

※Please refer to the wiring scheme in the connection diagram, if you have any questions, please call the corresponding personnel;

※When installing the module, screw the screws into the holes of the fixing frame and lock them;

※When the wire conductor at the end of the module is exposed, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Please do not touch or work with electricity on this product; it is recommended to use a switching power supply that has passed the relevant safety regulations (with short-circuit protection, over-voltage protection, and over-current protection).

Packaging diagram:

Packaging Instructions

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Project case: