Tel：400-900-9069

The detailed characteristics and authenticity (false) of the CREE lamp beads of the LED injection moulding module Q: Does Cree produce CREE lamp beads chips for red LED injection molding modules? A: Cree has never produced CREE lamp bead chips for red LED injection moulding modules, only blue light, green light and ultraviolet LED injection moulding module CREE lamp bead chips.

The LED injection molding module lamp beads EMC3030 is Yuanlei's innovative high-power LED products. Its principle is the same as the EMC3014, and they are all lamp beads made of new material EMC. The characteristics of LED injection molding module lamp beads EMC3030 are high temperature resistance, long life, high UV resistance, The specific parameters of the lamp beads EMC3030 of the LED injection module are as follows: Drive current: 150mA; drive

MOX268ELED injection molding module is one of the LED modules. Compared with other types of modules, the light-emitting angle is large, the brightness is high, and the light decay is low, so it is more widely used. Applicable occasions: single-sided light boxes in shopping malls, airports, subways, bus stations and other places; Scope of application: suitable for single-sided light boxes with a thickness of 10-20cm. Product Features of MOX268ELED Injection Molding Module

With the application of LED diffuse reflection light strips (rolling shutter) in the field of advertising light box backlighting more and more popular, coupled with the smaller and smaller size of the single LED package, the higher the power and the higher the brightness , LED diffuse reflector light strip (roller shutter type) came into being. Its ultra-high brightness coupled with the appropriate lens makes it possible to use only 4-5 light strips for a square meter of light box backlight, which greatly reduces the diffuse reflection of light box LEDs.

The LED injection molding module is a solid-state semiconductor device. The heart of the LED injection molding module is a semiconductor wafer. One end of the wafer is attached to a bracket, one end is the negative electrode, and the other end is connected to the positive electrode of the power supply, so that the entire wafer is epoxy resin encapsulated. Also known as LED injection molding module light-emitting chip, it is the core component of LED injection molding module, which is the P-N junction. Its main function is: