The huge demand in the LED market has led to the rapid development of the LED industry, and LED manufacturers have sprung up, which has attracted a large number of people to enter the industry, but for the staff who have just entered the light box lighting industry, it may be a problem for the light box LED lights. How to install the strips (such as the wiring of the light box LED strips, the number of installed light strips, the spacing of the light strips, the fixing method of the light strips, etc.) is not well understood, and there are many confusions. Whether the light box LED strips can be installed correctly determines whether the light box is It can work normally, no matter which aspect is wrong, it may affect the final lighting effect of the light box, then the following describes how to install the LED light bar of the light box.

First of all, it is necessary to understand the classification of light box LED light bars, which are mainly divided into the following two categories: light box side light source and light box backlight source. The installation methods of these two light bars are different.

Installation method of light box side light source

The side light source of the light box is also called the side-emitting light bar. The application of this kind of light bar has been mentioned in the article on how to arrange the LED lights in the light box. You only need to arrange the light strips on the top, bottom, left and right of the light box. This type of light strip is directly connected to the 220V mains, no need to configure the power supply, and the best effect is within three meters. The installation diagram is as follows:

Two ways to install

Screw fixing: There are screw holes on the plugs at both ends of each light bar. After placing the light bar as needed, fix it with screws;

Buckle fixing: In mass production, the buckle can be fixed on the light box first, and then lightly press the light bar on the buckle.

In addition, it should also be noted that such rolling shutter light bars are generally 12V or 24V voltage, and need to be equipped with a power supply, not directly connected to 220V power, so as not to cause problems such as burning lights.

The above is the introduction of how to choose waterproof LED light strips. If you need more detailed information on LED light strips, please consult Shenzhen SUNLITE Optoelectronics Co., Ltd. Shenzhen SUNLITE Optoelectronics Co., Ltd. is a company dedicated to LED light box lighting, logo lighting And decorative lighting products research and development, production, sales and service of high-tech enterprises. Our website is http://en.sunlite-led.com, welcome to consult.