Tel：400-900-9069

Product Specifications

Product name: 3 light module

Series Model: MRX269E

Product use: Applicable occasions: single-sided light boxes in shopping malls, airports, subways, bus stops and other places;

Applicable occasions: indoor and outdoor light boxes;

Scope of application: Widely used in double-sided light boxes with a distance of 60-120CM.

Product Features:

1. The light source adopts SMD3030 customized high-brightness lamp beads, with small thermal resistance, small light decay, and good color consistency

2. PMMA optical lens, luminous angle 10*65°, uniform lighting

3. Applicable to 600-1200mm distance light box

4. Fire UL94V-0 class

5. The product has low power consumption, high brightness, maintenance-free, 3-year warranty

6. DC24V low power input, safe and reliable use, waterproof grade up to IP65

Installation method:

Installed on the bottom of the light box, pre-positioned with adhesive, and fixed with screws;

Cascade can be cut: a single module can be cut;

Other parameters:

Remark:

①The test environment temperature is 25±2℃;

②The above data are typical values, and the actual parameters of the product may be different from the typical data.

Light distribution graph:

Connection diagram

Installation method or installation diagram

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The metal cube model was selected for the experiment

Evenly arranged according to product photoelectric performance parameters

Installation Instructions:

1. Use 2x2.5mm2 or more cables for the main power cord. If the power cord of the product needs to be lengthened, you must choose a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cord and cause excessive heat and cause adverse consequences. The length of the power cord should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

2. Please use the wiring scheme in the connection diagram, and the power output multiple channels should be connected to multiple channels to prevent the power overload of a single power supply channel;

3. When installing the product, screw the screw into the hole of the fixing frame, lock it, or install it with adhesive backing;

4. When the wire conductor is exposed at the end of the product, first cut off the exposed wire with diagonal pliers, and use a crimping cap to press the end to death for insulation protection;

5. In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

6. When installing the power supply of this product, please do not touch or work with electricity;

7. It is recommended to use a switching power supply (with short-circuit protection, overload protection) that has passed the relevant safety certification.

Packaging instructions:

>

Packaging Instructions

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Engineering case: