Tel：400-900-9069

Product Specifications

Product Name: 2835 Series

Product use: LED sign

Series Model: MUX280B

Applicable occasions: Blister characters, metal characters, resin characters, etc.

Scope of application: suitable for 600-1200mm distance light box

Product Features:

1. The light source adopts SMD2835 high-brightness lamp beads, the light decay is small, and the color is consistent

2. AC220V AC power supply, large number of cascades, no voltage drop

3. PC optical lens, 160 degree light-emitting angle, uniform lighting

4. Waterproof grade IP65

Installation method:

Installation method: Use PE foam double-sided tape and neutral glass glue for positioning and fixing.

Cascade can be cut: a single module can be cut;

Product Warranty:

3 years

Photoelectric parameters:

Dimensions (unit: mm)

Connection diagram

Installation Instructions

※The main power cable should use more than 2x1.5mm2 cable. If the power cable of the straight light needs to be lengthened, it must use a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cable and cause the power cable to overheat and cause adverse consequences. Switch the power supply and the straight light The length of the power line between the two should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

※Please use the wiring scheme in the connection diagram;

※When installing the straight light, screw the screw into the hole of the fixing frame and lock it;

※When the wire conductor is exposed at the end of the straight light, firstly use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

※In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

※Please do not touch or work with electricity on this product; it is recommended to use a switching power supply that has passed the relevant safety regulations (with short-circuit protection, over-voltage protection, and over-current protection).

Packaging diagram

▼Packaging Instructions

※Packed in electrostatic bag Size: 250*350mm

※Outer box size: 457*337*320mm

※10PCS/layer, 10 layers per box total 100PCS

※Net weight (NW) 6.5(1±10%)kg

※Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Installation diagram:

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The experiment uses the metal "B" font model

Evenly arranged according to product photoelectric performance parameters

Project case: