Do you have a quick and easy way to install bulk LED lens strips? The editor has prepared practical steps for you to quickly install the LED lens light. Please refer to the following steps for the quick installation of the LED lens light.

1) Clean the mounting surface

2) Prepare the self-tapping screws, washers, screwdrivers or electric drills required for installation.

3) Connect the main line, and adjust the power supply wiring of individual straight lights according to the actual wiring situation, but the number of lights connected on the same main line of power supply should not exceed the maximum number of cascades, and it can be powered at the same time. increased to 1.5 times. (Note: When installing the straight light, do not pull and press the lens forcefully, so as not to damage and affect your use)

4) Paste it into the light box for initial fixation, and then use ST2.9x10mm self-tapping screws to lock it.

5) It is recommended that the light box aluminum material has a heat sink.

6) It is strictly forbidden to use any acidic or alkaline adhesive to fix the product (including but not limited to glass glue, etc.)

7) Experienced electricians are recommended to guide the installation of strong electricity. If you have any questions about this manual, please consult the national toll-free service number (400-900-9069).

Remarks Wire 1.2mm2 Power DC24V