The so-called sparring means that the light bars are distributed on both sides of the light box, fixed by adhesive or screws, and the two sides are LED paired lights are in pairs, this LED paired light box distribution No light spots and ribs, very suitable as a light source for inkjet light boxes,

Applicable occasions for LED pair lights: single-sided light boxes in shopping malls, airports, subways, bus platforms and other places;

Scope of application of LED counter lights: widely used in single and double-sided advertising signs or advertising light boxes with a thickness of 12-35CM, and also suitable for local lighting in places.

Features of LED sparring lights:

1. Using American CREE high-power LED light source, the luminous efficiency of the product is as high as 1000lm/W;

2. The special lens design perfectly solves the phenomenon of ribs in the light box, and the illumination uniformity on the surface of the light box is high;

3. Using constant current drive technology, aluminum substrate has good heat dissipation effect, energy saving and environmental protection;

4. The product warranty is 3 years;

4. Suitable for medium and large light boxes with a thickness of 10-25cm;

LED counter light installation method:

Installed on the bottom of the light box, pre-positioned with adhesive, and fixed with screws;

Cascade can be cut: three modules can be cut;

Warranty of LED light bulbs:

Warranty 3 years or 13,000 hours, whichever comes first.