LED injection molding modules are now widely used in hotels, KTVs, and other public places with large passenger flow, because the safety of LED injection molding modules is an issue that must be emphasized. Today, let's talk about what matters should be paid attention to in the use of LED injection molding modules.

First, although the LED injection molding module has added waterproof materials, the waterproof level has reached 15, but the special power supply of the LED injection molding module cannot be waterproof, so the power supply of the LED injection molding module should pay attention to waterproof measures.

Second, the voltage and power of the LED injection molding module are assembled according to the previously calculated power, and the performance is relatively stable. Therefore, when the voltage is adjusted, it cannot be adjusted at will. LED injection molding modules are generally low-voltage input, and this voltage must not be increased arbitrarily. The installation distance of the LED injection moulding module should be within ten meters and cannot exceed this distance.

Third, the LED injection molding module is divided into positive and negative poles, so when contacting with the power supply, you must pay attention to the positive and negative opposites.

Fourth, when using the LED injection molding module, pay attention to fix it with double-sided tape and other substances. The LED injection molding module must be fixed well, and a layer of glass glue is added to the surface of the LED injection molding module to prevent the module from falling off due to sunlight radiation.

Fifth, when installing the LED injection molding module, pay attention to use the three-point line or the four-point line. When connecting the lines, one or more loops are formed. In order to distinguish the positive and negative poles, so as not to connect when there are many modules Wrong, two different power cords can be used. LED injection molding modules are all connected in series, but the number of groups is required, generally no more than 50 groups, otherwise the voltage will be attenuated and the brightness will be dimmed. After putting these LED injection molding modules into the box, tie a knot, and don't have the problem of disconnecting the line as soon as you pull it.

Sixth, as the protective shell of the LED injection molding module, the box body should pay attention to the tightness to prevent rainwater from entering the box.

Seventh, in order to prevent the damage of the LED injection molding module, please handle it with care during the installation process, do not push, pull and squeeze, so as not to affect the overall effect.

Eighth, after the connection of each circuit of the LED injection molding module is completed, in order to prevent it from falling off, it is necessary to design the barb on the wire seat in advance, and hold the circuit tightly. It's a bit of a hassle, but it's better than having problems in the process of using it.

Whether it is the height of the light box or the circuit of the line, the installation of the LED injection molding module must calculate the data before use, so as to save time during installation and improve the work efficiency.